CONDENSER MANUFACTURER Condenser is a heat transfer device, while stream enters using the cold water to reduce heat of steam and gives condensate or pure water. Baffles Cooling Systems is the designer and leading company of condenser manufacturer constructing different condenser types with good quality material in ASME latest edition. Four different types of condenser design are fallowed in the industries. BCS is a condenser manufacturer in Coimbatore, designing the condenser based on the customer requirement they are as follows: • Horizontal Tube • Horizontal Tube Bundle • Vertical Tube • Vertical Tube Bundle While in the process of condenser manufacturer, the best heat transfer coefficients in horizontal condensation, so we refer horizontal tube bundle type condenser for our customer is the best for heat transfer. Condensation in the shell chamber on the horizontal tube bundle The vapor enters from the top and flow through a horizontal tube bundle. Cooling water flows through the tubes and the vapor condense on the cold tubes and the condensate runs over the tube down to bottom. Due to the small condensate film thickness, good heat transfer coefficient results which reduce with increasing condensate rate. Advantage: • Low sub cooling • Low pressure loss and easy tube side cleaning • Tube pitch and baffle spacing can be adjusted to the vapor stream Disadvantage: • Non condensate gases must be removed, otherwise one part of cooling area is covered